The Goodman GSX16 16 SEER Air Conditioner is the latest high efficiency 16 SEER Air Conditioner from Goodman and provides a mix of performance, efficiency and value unmatched in the industry. The GSX16 uses the environmentally friendly refrigerant R-410A and features the unique Goodman sound control top design for quiet operation. The coil is made of rifled refrigeration-grade copper tubing and corrugated aluminum fins in a design that maximizes surface area. In addition, the unit has an attractive louvered metal guard that protects the coil from damage plus a powder-paint finish that provides premium durability and improved UV protection.

Standard Features:

• R-410A environmentally friendly refrigerant
• Factory-installed liquid line filter dryer
• 850-RPM condenser fan motor
• High-efficiency scroll compressor
• Copper tube/aluminum fin coil
• Service valves with sweat connections and gauge ports
• Contactor with lug connection
• Ground lug connection
• ARI Certified; ETL Listed

Description

Increase the functionality of your air conditioner with the Goodman CAPF3137B6 evaporator coil. This model is specifically designed for heat pump and split-system air conditioning installations. Its all-aluminum construction and superior functionality provides excellent air distribution. This unit offers upflow and downflow installation capabilities. For an easy attic access, it has 21" depth.

The Goodman CAPF3137B6 is intended to provide from 2.5 to 3 ton cooling capacity. This unit features painted cabinet and comes with the dimensions of 17 1/2" W x 21" D x 30" H. In order to reduce cabinet condensation, it is equipped with foil-faced insulation, which covers the internal casing. This evaporator coil uses chlorine-free R-410A refrigerant, which is eco-friendly and doesn't harm the environment. Some models are also compatible with R-22 refrigerant. In addition, this Goodman evaporator coil is ETL listed and AHRI certified.

Features

• All-Aluminum evaporator coil
• Optimized for use with R-410a refrigerant
• Some models suitable for use with R-410a or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21" depth for easier attic access
• Split seam front for easy access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed

Description

For both heating and combination heating/cooling systems, the Goodman GMS80804BN can be installed in various locations due to its reinforced and insulated steel cabinet with a durable baked enamel finish. The 80% efficiency rating means that 80 cents of every dollar goes into heating your home at peak levels, assisted by an advanced, patented aluminized-steel tubular heat exchanger and energy-conscious hot surface ignition system. This Goodman gas furnace has a single-stage combination redundant gas valve with quiet multi-speed blower motor. This unit has 80,000 BTU.

Note: This furnace does not meet state of California emissions laws. Please see instead our high efficiency furnaces (models GMS90, GCS90, GMV90, GCV90) which are compliant with California laws.

Features

• Corrosion-resistant, aluminized-steel tubular heat exchanger
• Energy-saving, reliable hot surface ignition system with patented adaptive learning algorithm
• Aluminized steel inshot burners
• Energy-saving PSC, multi-speed, direct drive blower motor
• Quiet, corrosion-resistant induced draft blower assembly
• Integrated furnace control with diagnostics
• Low voltage terminal blocks
• Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
• 40VA transformer for heating and air conditioning control service
• Combination redundant gas valve and regulator
• A rotating combustion air blower with option of venting the furnace through the top, right-hand side or left-hand side
• Completely assembled, factory run-tested
• Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
• Foil-face insulation lines the heat exchanger compartment
• Coil and furnace fit flush for easy installation
• Convenient left or right connection for gas and electric service
• Bottom or side air inlet
• Removable, solid-bottom block off

Description

A specially formulated super-hydrophobic (water repelling) product in a convenient aerosol package for field service. The non-conductive formula has numerous applications in the management of water on non-food, non-potable water surfaces for the HVAC/R trade; surfaces that are not exposed to ongoing abrasion (hand and foot traffic).

• Slows ice formation on refrigeration coils/cold plates

• Provides added corrosion resistance to coils

• Improves corrosion resistance to system components. Examples include circuit boards, filter-driers, flow control valves, equipment covering, etc.

• Provides added corrosion protection of solder connections on low voltage circuit boards

• Self-cleaning properties reduce rate of grime on outdoor coils

• Reduces rate of bacterial growth on non-food, non-potable water surfaces

• Improves water dispersion in condensate pans

• Many other applications!

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

1. Disconnect all power to the equipment before use. Do not spray near sparks, heat or open flame. Discontinue the use of power tools during use. Do not smoke while applying product.
2. Shake well before use. Use outdoors or in a well-ventilated area. Keep area ventilated until fumes are gone. Avoid breathing of fumes during application.
3. Ensure surface is clean and mostly to fully dry before applying. After a coil cleaning, the surface needs to be blown dry with an inert gas to remove excess moisture from the surface before applying Nu-Shield.
4. From a distance of 6-12 inches, spray a light coat on the surface, but no more beyond it being visibly wet. In other words, ‘Wet It and Forget It’. Contents in the canister will cover approximately 100 square feet. Depending on ambient conditions, allow a minimum of 20 minutes for Nu-Shield to dry on surface. Ensure surface appears visually dry and fumes are gone from the area before turning on power to equipment.

Note: Product needs to be applied after each coil cleaning. For best results, especially in corrosive environments, the product should be reapplied annually.

10 Year All Parts Warranty

SHIPPING DETAILS

Mostly All Of Our Products Are Shipped Same Or Next Day

Your product will be mostly shipped using Freight Company such as SAIA, ESTES, Old Dominion, FEDEX or UPS and will be delivered in 1-5 business days depending upon your geographical location from our warehouses. We ship products from warehouses in NY, NJ, FL, CA,AZ, TX And MO. Mostly if you are close to our warehouses, you should receive the Product in 1-3 business days. We will email you your tracking number soon as its shipped out or you can log into your account on our website by using your email address and password you created at the time of placing order to check all the shipment and product details.
Please remember we only ship to 48 states within United States. Due to expensive shipment fee we do not ship to Hawaii & Alaska. We do not ship to Canada, Puerto Rico, Jamaica and other countries due to custom issues.

Though above shipment and delivery process is what we normally practice, under unforseen circumstances they cannot be guaranteed at all times. But we do our best and mostly succeed to ship the product either same or the next day.

Overnight Shipping Details (if required)

We can ship overnight or by Second Day Air. But beacuse these are air conditioners and the package weighs more than 90 pounds usually, shipping overnight can result in the package being mishandled and delivered damaged. Plus it cost anywhere from $180-$850 more than regular shipping depending upon your location from our warehouse. Feel free to email us with such enquiries.