The Goodman GSX160601 is a high-efficiency condenser for a split system air conditioner. This outdoor component needs to be connected with an indoor air handler or evaporator coil to create a complete air conditioning system. This allows for many options for personalizing an HVAC system, which can be altered depending on desired energy-efficiency, cost, installation type and number of cooling zones.

This model is capable of an impressive 16 SEER efficiency when paired with the correct components. Specific cooling ratings will depend in the indoor air handler or furnace used. This Goodman condenser features a 5 ton cooling capacity at 54,000 BTU. It's usually recommended that the tonnage of the outdoor condenser be less than the indoor unit.

The GSX16 line of split system air conditioners uses a high-efficiency compressor. This Goodman condenser is reliably constructed and protected by a steel louver coil guard with an attractive architectural gray powder-paint finish that has a 500-hour salt spray approval. This unit comes fully charged for 15' of tubing length with environmentally friendly R-410A chlorine-free refrigerant, which requires special handling by a professional HVAC contractor.

Features

• R-410A environmentally friendly refrigerant
• High-efficiency Copeland® (No Suggestions) scroll compressor
• Factory-installed filter dryer
• Fully charged for 15 feet of tubing length
• Copper tube/enhanced aluminum fin coil
• Sweat connection service valves with easy access to gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed
• Unique Goodman® brand louvered sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When central air conditioner is properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds

Description

The New Goodman ASPT Series Air Handler have replaced the old ASPF series with a brand new improved model. The SmartFrame Sub Structure is at the heart of this design - a new skeleton which adds lateral stability to the chassis, new mounting locations for internal compenents and additional insulation retension. It also eliminates the need for external side and back screws. It also features an ECM motor achieving high efficiency in a multi-speed air handler. These new models are 4 way multi-position, capable of upflow downflow or horizontal airflow direction. Unit ships ready for upflow or horizontal left -- downflow or horiz. right is a simple conversion process. The ASPT model has a painted finish and factory-mounted thermal expansion valve (TXV).

Standard Features:

• Suitable for use with the refrigerant R-410A
• Direct-drive, multi-speed ECM motor
• Internal factory-mounted TXV valve
• Transformer and blower time-delay on all units
• All-Aluminum coil
• Complies with the Factory-sealed Air Handling Credit with or without field-installed filter kits as listed in the 2001 Florida Building Code, Chapter 13, Section 610.2.A.2.1
• AHRI Certified; ETL Listed

Description

The Goodman HKSX10XC is an electric heat kit. It comes from the HKS line, which is intended for use with Goodman air handlers. This model uses rust-resistant nickel chromium heating elements and has 10 kW nominal heating.

This Goodman heat kit features sequences for better temperature control. It has multiple branch circuit capability and has been completely assembled and tested so our customers know they are good to go. Plus, Goodman electronic heat kits are known for being easy to install and a plug-in wiring harness makes it simple to fit into the air handler.

Features

• Sequencers for better temperature control
• Multiple branch circuit capability
• Completely assembled and tested
• Control circuitry arranged to readily permit staging
• Factory-installed circuit breakers available on specific models (See Electrical Data)
• Fuse link secondary high-temperature limit control
• Plug-in wiring harness for ease of installation into air handler
• Rust-resistant nickel chromium heat elements
• ETL Listed

Description

A specially formulated super-hydrophobic (water repelling) product in a convenient aerosol package for field service. The non-conductive formula has numerous applications in the management of water on non-food, non-potable water surfaces for the HVAC/R trade; surfaces that are not exposed to ongoing abrasion (hand and foot traffic).

• Slows ice formation on refrigeration coils/cold plates

• Provides added corrosion resistance to coils

• Improves corrosion resistance to system components. Examples include circuit boards, filter-driers, flow control valves, equipment covering, etc.

• Provides added corrosion protection of solder connections on low voltage circuit boards

• Self-cleaning properties reduce rate of grime on outdoor coils

• Reduces rate of bacterial growth on non-food, non-potable water surfaces

• Improves water dispersion in condensate pans

• Many other applications!

• Wt. Lbs.: 8
• Breaker No
• Nom. kW 10.0
• Shipping Weight 3.50
• Shipping Width 8.40
• Shipping Length 9.60
• Shipping Height 14.90

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

1. Disconnect all power to the equipment before use. Do not spray near sparks, heat or open flame. Discontinue the use of power tools during use. Do not smoke while applying product.
2. Shake well before use. Use outdoors or in a well-ventilated area. Keep area ventilated until fumes are gone. Avoid breathing of fumes during application.
3. Ensure surface is clean and mostly to fully dry before applying. After a coil cleaning, the surface needs to be blown dry with an inert gas to remove excess moisture from the surface before applying Nu-Shield.
4. From a distance of 6-12 inches, spray a light coat on the surface, but no more beyond it being visibly wet. In other words, ‘Wet It and Forget It’. Contents in the canister will cover approximately 100 square feet. Depending on ambient conditions, allow a minimum of 20 minutes for Nu-Shield to dry on surface. Ensure surface appears visually dry and fumes are gone from the area before turning on power to equipment.

Note: Product needs to be applied after each coil cleaning. For best results, especially in corrosive environments, the product should be reapplied annually.

10 Year All Parts Warranty

SHIPPING DETAILS

Mostly All Of Our Products Are Shipped Same Or Next Day

Your product will be mostly shipped using Freight Company such as SAIA, ESTES, Old Dominion, FEDEX or UPS and will be delivered in 1-5 business days depending upon your geographical location from our warehouses. We ship products from warehouses in NY, NJ, FL, CA,AZ, TX And MO. Mostly if you are close to our warehouses, you should receive the Product in 1-3 business days. We will email you your tracking number soon as its shipped out or you can log into your account on our website by using your email address and password you created at the time of placing order to check all the shipment and product details.
Please remember we only ship to 48 states within United States. Due to expensive shipment fee we do not ship to Hawaii & Alaska. We do not ship to Canada, Puerto Rico, Jamaica and other countries due to custom issues.

Though above shipment and delivery process is what we normally practice, under unforseen circumstances they cannot be guaranteed at all times. But we do our best and mostly succeed to ship the product either same or the next day.

Overnight Shipping Details (if required)

We can ship overnight or by Second Day Air. But beacuse these are air conditioners and the package weighs more than 90 pounds usually, shipping overnight can result in the package being mishandled and delivered damaged. Plus it cost anywhere from $180-$850 more than regular shipping depending upon your location from our warehouse. Feel free to email us with such enquiries.