Description

The Goodman GPC1448H41 is a self-contained, packaged air conditioner. For air conditioning, this model uses an energy-efficient compressor with an internal release valve. This line of air conditioners uses the environmentally friendly R-410A chlorine-free refrigerant for cooling. It has a 4 ton and 35,600 BTU cooling capacity.

This Goodman air conditioner comes from the GPC14Hline, which utilizes an EEM blower motor. This unit's copper tube/aluminum fin condenser coil provides impressive reliability. Plus, it comes with a totally enclosed, permanently lubricated condenser fan motor for long-lasting reliable use.

Goodman's packaged units are designed to be incredibly energy efficient. This model offers 14.0 SEER and 12.0 EER ratings. These contribute significantly to home heating and cooling costs, especially when compared to systems with less efficient ratings.

The benefit of a packaged unit is that it comes fully complete and self-contained, housed in a heavy-gauge, galvanized-steel cabinet with an attractive architectural gray powder-paint finish. It is fully insulated, which protects it from the elements while reducing the sound it makes during operation. It's easy to maintain, as well, due to convenient access panels. This model allows for a ground-level or rooftop mount with a quiet horizontal flow installation.


Features

• R-410A chlorine-free refrigerant
• Energy-efficient compressor with internal relief valve
• EEM blower motor
• Quiet horizontal discharge
• Copper tube / aluminum fin coil
• Totally enclosed, permanently lubricated condenser fan motor
• 5 kW to 20 kW electric heat kit available as a field-installed option
• Heavy-gauge galvanized-steel cabinet with attractive Architectural Gray powder-paint finish
• Fully insulated blower compartment with convenient access panels
• Louvered condenser coil protection
• One footprint; three heights

Description

Upgrade your packaged unit with the Goodman HKP-10C electric heat kit. This accessory comes with sequencers to make temperature control better and easier. The heating offers a 9.5 kW capacity at 240 volts to maintain proper warmth in the place. For durability and lasting performance heat elements are made of rust resistant nickel chromium.

To keep installation simple and fast the heat strip has a plug-in wiring harness. This model has a pre-installed circuit breaker for system protection from overloads and short circuits. Complete assembling and testing guarantees faultless immediate operation. Add an extra heat to your existing system with the Goodman HKP-10C and supplement your home with the desired comfort ambience.





Features

• Sequencers for better temperature control
• Multiple branch circuit capability
• Completely assembled and tested
• Control circuitry arranged to readily permit staging
• Factory-installed circuit breakers available on specific models
• Fuse link secondary high-temperature limit control
• Plug-in wiring harness for ease of installation into air handler
• Rust-resistant nickel chromium heat elements
• ETL Listed

Description

A specially formulated super-hydrophobic (water repelling) product in a convenient aerosol package for field service. The non-conductive formula has numerous applications in the management of water on non-food, non-potable water surfaces for the HVAC/R trade; surfaces that are not exposed to ongoing abrasion (hand and foot traffic).

• Slows ice formation on refrigeration coils/cold plates

• Provides added corrosion resistance to coils

• Improves corrosion resistance to system components. Examples include circuit boards, filter-driers, flow control valves, equipment covering, etc.

• Provides added corrosion protection of solder connections on low voltage circuit boards

• Self-cleaning properties reduce rate of grime on outdoor coils

• Reduces rate of bacterial growth on non-food, non-potable water surfaces

• Improves water dispersion in condensate pans

• Many other applications!

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

1. Disconnect all power to the equipment before use. Do not spray near sparks, heat or open flame. Discontinue the use of power tools during use. Do not smoke while applying product.
2. Shake well before use. Use outdoors or in a well-ventilated area. Keep area ventilated until fumes are gone. Avoid breathing of fumes during application.
3. Ensure surface is clean and mostly to fully dry before applying. After a coil cleaning, the surface needs to be blown dry with an inert gas to remove excess moisture from the surface before applying Nu-Shield.
4. From a distance of 6-12 inches, spray a light coat on the surface, but no more beyond it being visibly wet. In other words, ‘Wet It and Forget It’. Contents in the canister will cover approximately 100 square feet. Depending on ambient conditions, allow a minimum of 20 minutes for Nu-Shield to dry on surface. Ensure surface appears visually dry and fumes are gone from the area before turning on power to equipment.

Note: Product needs to be applied after each coil cleaning. For best results, especially in corrosive environments, the product should be reapplied annually.

SHIPPING DETAILS

Mostly All Of Our Products Are Shipped Same Or Next Day

Your product will be mostly shipped using Freight Company such as SAIA, ESTES, Old Dominion, FEDEX or UPS and will be delivered in 1-5 business days depending upon your geographical location from our warehouses. We ship products from warehouses in NY, NJ, FL, CA,AZ, TX And MO. Mostly if you are close to our warehouses, you should receive the Product in 1-3 business days. We will email you your tracking number soon as its shipped out or you can log into your account on our website by using your email address and password you created at the time of placing order to check all the shipment and product details.
Please remember we only ship to 48 states within United States. Due to expensive shipment fee we do not ship to Hawaii & Alaska. We do not ship to Canada, Puerto Rico, Jamaica and other countries due to custom issues.

Though above shipment and delivery process is what we normally practice, under unforseen circumstances they cannot be guaranteed at all times. But we do our best and mostly succeed to ship the product either same or the next day.

Overnight Shipping Details (if required)

We can ship overnight or by Second Day Air. But beacuse these are air conditioners and the package weighs more than 90 pounds usually, shipping overnight can result in the package being mishandled and delivered damaged. Plus it cost anywhere from $180-$850 more than regular shipping depending upon your location from our warehouse. Feel free to email us with such enquiries.