• Multiple speed fan
• Timer
• I Feel mode
• IR remote control
• Adjustable airflow
• Privacy lock mode
• Sleep mode
• Fahrenheit ° F / Celsius ° C
• Self-diagnosis
• High efficiency G-10 Inverter Technology

• Heat pump advantage
• Low voltage start-up
• Quiet operation
• Intelligent defrost
• condenser
• Power failure mode
• Intelligent pre-heating
• Polymeric air filters
• 5/7 year limited warranty

Specifications

Specifications

WARRANTY FROM THE MANUFACTURER

· 7-year on compressor and 5-year other parts.
* Registration card will be sent in the package; this card should be filled by HVAC technician (installer). A lot of customers have called us asking if they install the unit without the licensed AC Company, will their warranty be void? Answer to that question is Yes. Unfortunately no brand or manufacturer can take the responsibility of the equipment if it was not professionally installed.

FOR COMPLETE WARRANTY DETAILS, CLICK HERE (WILL OPEN PDF FILE IN A NEW WINDOW)

Kingersons Store Warranty: If anything defective or damaged upon delivery contact Kingersons within 15 days. Kingersons at that point will provide free replacement. After first 30 days, your warranty for parts and compressor is moved from Kingersons to the Manufacturer.
Manufacturer warranty: Once the warranty rolls over to the manufacturer, you will have a toll free number for your tech support for any assistance you may need with the product in future. On Air Conditoners you will receive five years on compressor and one year on parts from them.
TIP: Installing a split AC is easy for any AC company, but can get tricky for a homeowner. In many cities it is illegal to touch a refrigerant and perform other such activities without a license. We as a company cannot encourage a customer to install the split AC, but have seen a lot of customers do it in the past. At the same time we have seen some customers installing the unit unprofessionally without performing all the necessary steps, which resulted in issues with the AC unit within the first 3 months.

In short, you can do all the handyman work yourself but can hire an AC company to finish the important process on the Split unit. For example you can drill the hole in the wall, hang the indoor unit on the wall carefully and then place the outdoor unit outside on a concrete pad or a flat surface. But there are some steps you cannot perform, as you do not have tools for it. Which is where your AC Company gets involved to finish all the necessary steps. For example they will need to vacuum the lines, check for the leaks and then release the refrigerant.
Also, remember no matter how good of an install kit the manufacturer provides, these steps are a must for a successful split AC installation. Some company's selling split AC will make you believe their installation kit is quick connect, which means you do not have to have a AC company to install it. But that is not true. Our install kits are “quick connect” too, but any thing can go wrong during the shipment or the parts in the package. For example the copper lines may have a small hole from manufacturing defect. So for example if the lines are not tested for leaks, the refrigerant will leak slowly after installation and within 1-2 months your AC will stop working and you will end up paying $500 or more to have more refrigerant added. So it is worth having it installed the right way to begin with. Your local AC Company can charge you on an hourly basis and above-mentioned process should not take more than 1-2 hours. But if they install the whole unit from scratch to finish, number of hours can vary depending upon each individual situation. This process will not only ensure you have a working split AC for a long time, but at the same time you will have an energy efficient AC that saves you electricity bills as well.