|
|
Product Name :
3 TON Frigidaire FT4BG036K B6VMAX36KB Central Split System HEAT PUMP SEER 19
|
|
|
|
|
|
Item# :
|
FT4BG036K B6VMAX36KB
|
|
|
|
|
|
Choose QTY
:
|
Required
|
|
|
|
|
|
|
PLEASE CLICK HERE ---> INFORMATION AND SPECS ON THE SYSTEM
Outdoor Unit Features:
• iQ Drive: Inverter driven Samsung rotary compressor provides five capacities in modulating operation from a two stage thermostat.
• Interface control board: Two digit LED provides system operation, status and diagnostic troubleshooting information.
- Utilizes a Nordyne: patented capacity control algorithm to select the optimum system capacity level.
- System Protection: Internal controls monitor system operation to protect the inverter drive and compressor.
- Cooling operating temperature range: 50 °F to 125 °F.
- Locks out heat pump heating: below 0 °F.
- Adaptive demand defrost: Provides additional energy savings in heating by defrosting only when necessary.
- Five Minute Restart Time Delay: When the unit shuts down, a delay keeps the unit from restarting, eliminating the highest cause for compressor failure.
• Suction Accumulator: Protection from liquid flood back and future compressor failures.
• R-410A Refrigerant: Environmentally friendly non-ozone depleting refrigerant.
• Compressor and Component Access: Designed to make servicing easier for the contractor, hinge access panels are provided to all controls and the compressor.
• High Efficiency with the low Sound Levels: Up to 19 SEER with sound ratings of 59-73 depending upon operating conditions.
• Compressor Sound Blanket: Engineered to significantly reduce unwanted compressor noise.
• Variable Speed Condenser Motor and Swept-Wing Fan Blade: A heavy duty brushless DC motor for long lasting reliability and engineered to provide quiet operation. Requires no maintenance and is completely protected from rain and snow.
• Common Suction Service Port: This port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability.
• Discharge muffler: Reduces compressor noise and vibration.
• High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits.
• Low Pressure Switch: Protects against loss of system refrigerant charge.
• Liquid Line Filter Drier: Included with unit, field installed.
• Copper Tube / Aluminum Fin Coils: outdoor coils are designed to optimize heat transfer, and increase durability and reliability.
• Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather.
• Composite Base Pan: Absorbs sound and is corrosion resistant. Composite pan is also stronger and lighter than steel.
• Designed using galvanized steel: with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units.
• One Piece Top/Orifice: Designed for maximum airflow and quiet operation.
• Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads.
Indoor Unit Features:
• Energy Efficient Variable Speed ECM Motor: Advanced technology provides 16 field-selectable cooling airflows and automatically sets heating airflows based on the amount of installed heat.
• Quiet Blower Operation: Extra quiet and smooth blower on and off cycles.
• Constant airflow: Motor automatically adjusts to different static loads.
• Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities.
• Multi-poised: Can be used in horizontal ,upflow,downflow and vertical applications.
• Built in Filter Rack: Makes the air handler easy to service.
• Plug-in Heater Kit: Available in 5 kw through 30 kw (Not for use in 115 Volt units)
• Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing.
• Breaker Accessibility: Breaker accessible from the front of the unit when heater is applied.
• Plastic Drain Pan: Provides corrosion resistance.
• Durable Cabinet: Galvanized steel with a polyurethane finish. The finish will endure 950 hours of salt spray and resist corrosion 50% better than comparable units.
• Designed to meet the requirements 610.2.A.2: Meets Florida building code requirements for air leakage.
• Thermal Expansion Valve: Factory installed externally equalized thermal expansion valve provides precise refrigerant control under varying load conditions.
• Cabinet Insulation: 1" insulation with an R-value of 4.2 contributes to quiet operation and prevents cabinet sweating in difficult applications.
• Anteater Coil Technology: Copper alloy with zinc additives to stop formicary corrosion.
In 1916, the Guardian Frigerator Company was organized to manufacture early versions of the electric refrigerator. General Motors saw the potential of this company and purchased it in 1918, renaming the company Frigidaire. Since then, the company launched the first color-matched appliances, the first home chest freezer, the first automatic ice dispenser and the first built-in automatic lint removal system on a washing machine.
Frigidaire heating and cooling products are manufactured by NORDYNE, a company that has played a significant role in the home comfort market dating back to 1919 - starting off with the first oil burners for residential heating equipment, delving into the manufactured housing market and excelling in the residential heating and cooling market.
While most manufacturers test their products at random, we test each and every furnace and air conditioner we manufacture. In fact, each product goes through our "check, check and recheck" process at every station during the manufacturing process. This process, known as Demand Flow Technology or "DFT", means that each split-system Frigidaire air conditioner and heat pump is checked 144 times, each Frigidaire gas furnace is checked 234 times, and each packaged unit is checked 72 times during the manufacturing process.
In addition, our quality control station performs 100% computer automated testing to eliminate human error in the final analysis. We were the first heating and air conditioning manufacturer to become DFT certified, and our long parts warranty and Comfort Quality Pledge reflect the confidence we have in our manufacturing process.
|
Manuals & Downloads
|
SHIPPING DETAILS
Mostly All Of Our Products Are Shipped Same Or Next Day
Your product will be mostly shipped using Freight Company such as SAIA, ESTES, Old Dominion, FEDEX or UPS and will be delivered in 1-5 business days depending upon your geographical location from our warehouses. We ship products from warehouses in NY, NJ, FL, CA,AZ, TX And MO. Mostly if you are close to our warehouses, you should receive the Product in 1-3 business days. We will email you your tracking number soon as its shipped out or you can log into your account on our website by using your email address and password you created at the time of placing order to check all the shipment and product details.
Please remember we only ship to 48 states within United States. Due to expensive shipment fee we do not ship to Hawaii & Alaska. We do not ship to Canada, Puerto Rico, Jamaica and other countries due to custom issues.
Though above shipment and delivery process is what we normally practice, under unforseen circumstances they cannot be guaranteed at all times. But we do our best and mostly succeed to ship the product either same or the next day.
Overnight Shipping Details (if required)
We can ship overnight or by Second Day Air. But beacuse these are air conditioners and the package weighs more than 90 pounds usually, shipping overnight can result in the package being mishandled and delivered damaged. Plus it cost anywhere from $180-$850 more than regular shipping depending upon your location from our warehouse. Feel free to email us with such enquiries.
|
Delivery Acceptance, Returns, Exchanges and Cancellation Policy. |
|
We truly appreciate your business and for the past 2 decades being in this business we have continued to do our best to earn customer trust with each transaction. We want you to be happy with your purchase.
100% Satisfaction is guaranteed with all your purchases. In case any of the RARE complications occur, we will handle them upto your best interest and satisfaction. |
|
Delivery Acceptance Terms:
If you receive a package that seems damaged or dented, please open the package in front of the driver and after inspection if you see the product has a severe damage you can refuse the package and call us immediately. We will then arrange a new shipment (Free Replacement) ASAP.
Please note: If the box looks visibly damaged, the product inside may still be in perfect condition as they are well padded for shipping purposes.
PLEASE DO NOT SIGN OR REFUSE THE PACKAGE WITHOUT INSPECTING THE CONDITION OF THE PRODUCT INSIDE. Please take pictures if needed, accept or refuse shipment based upon the condition of the product in the box, not based upon the condition of the box. Please remember if you signed off on a delivery document, insurance cannot be filed if cosmetic damage is found at a later date, as it is considered to have happened after delivery at jobsite.
If you need to get in touch with KINGERSONS, please call KINGERSONS customer service number at 1-386-951-1722 OR email us with your query. AS PER OUR WEBSITE, BELOW IS OUR EXCHANGE/RETURN POLICY FOR YOUR REFERENCE.
DEFECTIVE EXCHANGE
If unit (any product) is defective, depending upon the brand you buy, it will be taken care of by manufacturer warranty. Usually they will send out the replacement part within 24 hours, if replacing part is not a solution, they would probably replace the whole unit if the product was found defective. Replacement will only be made with the same model, if customer decides to upgrade or downgrade to a different model, we'll treat it as a return and a new order.
* All returns should be in original packaging and in brand new condition. Installed products are not considered brand new and cannot be returned.
* All damaged returns and replacements must be requested within 24 hours after the receipt of the product. *
Before shipping the product back, you should request an RA# (Return Authorization number), without an RA# your package will not be accepted, will be refused and sent back by the warehouse.
RETURNS
For all returns, customer is responsible to ship product back to our warehouse at their own expense; restocking fee of 19% will apply regardless if defective and original shipping fee (from $69 to $189 depending upon the product you purchased) will not be refunded as it is paid to the trucking company's and they are non-refundable.
CANCELLATIONS
If you placed the order and you wanted to cancel the order BEFORE IT IS SHIPPED, we will gladly cancel your order and $15.99 cancellation fee will be charged and 3% credit card processing charges will not be refunded. Please make sure that you call us within few hours after the order is placed. We ship the items out same or next business day. We cannot process cancellations after the product is shipped out. It will be considered as a return instead once the product is shipped and you will need to pay the return charges. If the delivery of the shipment is refused above return policy will apply. Once the item is shipped, the shipping company will not refund us the shipping fee back and will charge us for shipping both ways, this will not be refunded if cancelled after the product is shipped and 19% restocking fee will apply.
|
|
THANK YOU ONCE AGAIN FOR SHOPPING WITH US! | |
|
|
|
|
|
|
|
|
|
|
|